|
|
Trial bikes
New 2007 models
|
 |
| 1 Disco B.B. Bar Plugs |
1 |
1 |
 |
|
KEY FEATURES:
- 2 x aerospace grade titanium bolts
- Anodised finish with lazer etched graphics.
- Available in Blue, Black, Red, Alloy or Borinium.
- Index machined 6000 series alloy
- O-ring weather seals
- Shoulder prevents grip slipping off.
- Protects end of bars in crashes.
- Stops ingress of mud, debris and water into bars.
- Multi-fit, fits most bars!
TECH SPEC:
The Disco bar bung was originally designed because we felt there was a need to create a bar bung that would act effectively to stop your grips or hands flying off in wet conditions. From their introduction they have not only been a huge success, but for 2002 we given it four upgrades!
|
| 1 Brake Pivot Plugs 8mm and 10mm |
1 |
1 |
 |
|
KEY FEATURES:
- Machined from 6000 series alloy.
- Fits all frames/forks with a 10mm or 8mm brake stud.
- Knurled and lazer etched graphics.
- Available in Red, Blue, Black, Alloy or Borinium.
TECH SPEC:
We have developed the brake pivot plugs, to fill the nasty hole left when the brake pivot studs are taken out of the frame when using disc brakes. Machined from 6000 series, the brake pivot plugs put the finishing touch to any bike with disc brakes.
|
| 1Stem Plug |
1 |
1 |
|
|
|
KEY FEATURES:
- Anodised finish with lazer etched graphics .
- Available in Blue, Black, Red, Alloy or Borinium.
- CNC turned alloy wedges and cap.
- Available to fit 1 1/8" steerer tubes.
- Weighs only 24 grams.
TECH SPEC:
This system does away with the star fangled nut, by using a unique CNC turned wedge system that makes it completely re-usable. Complete with dished anodised and lazer etched cap with machined wedge, this plug not only does the job but finishes off any control centre.
|
| 1Stem Stakkers |
1 |
1 |
|
|
|
KEY FEATURES:
- Anodised finish with lazer etched graphics .
- Available in Blue, Black, Red, Alloy or Ice grey.
- CNC turned alloy.
- 5mm, 8mm and 12mm sizes in 1 1/8".
TECH SPEC:
Unlike most stem stakkers that are solely a bit of unfinished alloy, we have made a CNC turned, anodised and laser etched stakker that really adds to the appearance of the control centre.
|
| 1Billet CNC X-Country Stem |
1 |
1 |
|
|
|
KEY FEATURES:
- Fully CNC machined from aerospace grade Alloy Billet
- Twin stainless steel pivot hinge clamp, incorporating o-ring weather seals
- Machined tolerance related Delrin sleeve
- 5 degree rise
- 3 x Titanium Bolts
- Lazer etched and anodized with either Alloy or Borinium (shown) Clamp.
- 100mm or 120mm reach
TECH SPEC:
Fully CNC machined from aerospace grade Alloy Billet, the Angelo stem has a spec to die for! It has a unique twin stainless steel pivot hinge clamp, incorporating o-ring weather seals. A machined tolerance related Delrin sleeve eliminates metal to metal contact and bar creak, clamped by two machined M6x17mm Titanium Bolts. Its©&Mac246; unique construction creates a torsionally rigid stem without excess weight. An M8x20mm Titanium bolt and alloy wedges firmly clamp the stem to the steerer tube. Finish: Clear anodised and laser etched. 5 degree rise Reach/Weighs: 120mm: 230gms 100mm: 208 gms
|
1Billet CNC Seat Clamp
|
1 |
1 |
|
|
|
KEY FEATURES:
- CNC machined from solid billet aircraft grade alloy.
- Unique rocking pivot for maximum clamping.
- Two types - Q/R or allen bolt version.
- Available in 34.9, 31.8 and 28.6 frame diameters.
- Available in Borinium, Red, Blue, Black and Alloy.
TECH SPEC:
We have seen it time and time again, riders who have spent a lot of money building the ultimate bike, only to have a cheap cast seat clamp!
That's why we have created a detailed Billet CNC seat clamp. The unique camlok rocking pivot generates a more powerful clamping force which relieves the bending moment on the clamp stud. We designed the clamp so the tightening rod always stays straight, unlike most other designs where they bend like a banana!! After tightening the cam it 'locks up' on the stainless steel nut, to allow two positions for the lever, flat or upright. This creates an awesome clamping force on the frame/seatpost faces.
The delrin dust seal which comes supplied will fit either a 27.2 or 25.4 seatpost, for other sizes of posts this can simply be removed.
|
1XLR SERIES Titanium Camlok Wheel Q/r's
|
1 |
1 |
|
|
|
KEY FEATURES:
- Lightest full spec Q/R's available.
- Smoothest operation through acetyl bearings and unique cam profile which generates maximum force.
- Removable alloy lever keys for urban security.
- High grade titanium tie rods.
- Stainless steel springs.
- Available in Red, Black, Blue, Alloy or Borinium.
- Anodised finish with lazer etched graphics.
- Fast, Effective Security!
TECH SPEC:
Camloks have a silky smooth action which is due to our unique cams' low geared profile to generate maximum clamping force with minimum effort.
The cams over centre at the locking position is to prevent accidental release! The removable lever key allows for extra weight reduction, and is also an added security feature! With fully CNC machined cams, washers and adjuster nuts, high grade titanim together with a host of specifically designed features make camloks one of the lightest Q/Rs in the world.
Camloks have been tried and tested in tough race conditions by many top Pro's at National level in both MTB and Road Races over the past 8 years
|
|
.
